Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


zc problem


zcrx1
09-26-2002, 12:00 AM
i just swapped in a zc engine into my crx 6 days ago anyhow the problem is that when ever the car is on ilde it revs up and down by itself. it also effects my driving only at low rpms. it makes the car jerk forward and backwards when i drive from 1500 rpm to 3000 rpm. but when i go past 3000 rpm the car accelarates good. please help!!!

91civicDXdude
09-26-2002, 01:46 AM
vacuum leak probably. check all your vacuum lines for cracks, holes, or misplacing.

civickiller
09-26-2002, 02:49 AM
what ecu you runnin. cause my friend was runnin a p30 on his sohc vtec and it surges too

marked001
09-26-2002, 08:42 AM
yeah...definitely check that you've got your vacuum lines correct...any codes?

zcrx1
09-26-2002, 09:21 AM
i thought it was my vacum lines so i had some one with a crx dx with a zc in it to do my vacum lines. his car is fine but mine still has the problem. i am tried it with the pm7 and integra ecu and the problem was still there...could it be my distributor?

89CivicHBSi
09-26-2002, 02:00 PM
Its prolly your throttle angle sensor. Its on the side of the throttle body. Mine did the same thing just unplug it and see if it does it.. It will turn your Check light on but. it wont go up and down...

kurt

perndog1
09-26-2002, 02:14 PM
Yep I have the same problem with my ZC too, and having those urethane bushings in your motor mounts, you notice when the cars rpm's rise and fall because the car will rattle and then stop its kinda bothersome when your whole arm shakes. Thanks for that info as well i gotta check that out it might just be the engine mount bushings or the engine.

ian:smoker2:

perndog1
09-26-2002, 02:23 PM
Alright so i just tried what you said Kurt, god damn it worked like a charm. So that means my throttle angle sensor is bad or is that just how it is, if i can fix it I know where there is on sitting right know i can get cheap is that the solution to the rise and fall of the rpm's. thanks again kurt.

ian

zcrx1
09-27-2002, 01:59 AM
can anybody show me the proper diagram for vacuum hoses for my crx dx with a zc egine installed??? please help

kris
09-27-2002, 10:15 AM
Originally posted by zcrx1
can anybody show me the proper diagram for vacuum hoses for my crx dx with a zc egine installed??? please help


DOnt know if this even helps:
http://www.thezcresource.com/assets/images/1-5.jpg

kris
09-27-2002, 10:16 AM
http://www.thezcresource.com/html/zcbook.html

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food