new guy w/?

I got a kenwood single ch. mono class d 1000w amp and 2 12" power acoustic subs 2ohm dvc I need to know whats the best way to wire these for the best sound thanks

Best bet would be to wire them as followed, that is if your amp is 2OHM stable:
http://www.rockfordfosgate.com/rftech/woofer_wizard/2_2ohmDVC_2ohm.gif

Best bet would be to wire them as followed, that is if your amp is 2OHM stable:
http://www.rockfordfosgate.com/rftech/woofer_wizard/2_2ohmDVC_2ohm.gif


so basically lookin at the diagram theres only going to be 2 wires going to my amp for speakers one + and one-

2 actully wires, yes a set of -+ and another -+ set

Those last few posts were a bit confusing, but if you wire it just as the picture shows, you'll have one + and one - wire going to the amp, as you see sub #1's first set of coils are wired into the wire coming off of sub #2, leaving you one stretch of wires going to the amp.