Power window regulator

Just purchased an aftermarket window regulator and motor assembly for my 2000 2dr. Do I need to find a big enough rivet gun to install or can I use bolts and nuts. Besides taping the window in the up position are ther any tricks?

thanks

Just purchased an aftermarket window regulator and motor assembly for my 2000 2dr. Do I need to find a big enough rivet gun to install or can I use bolts and nuts. Besides taping the window in the up position are ther any tricks?

thanks

Bolts and nuts are fine thats what I used. Taping the windows up did not work that well so I stuck a stick in the door and it worked perfectly

Just finished. It was hard to get all three guides lined up at the same time . It took a little moving the window up and down with a helper.

The main reason for the post, however, is to confess what a bone head I am. Once I hooked up the new motor it did not work. after fooling around for a while I found that the exisitng connectoron the switch side was not tight. This means that the old motor was OK. I checked for power at the motor before ordering the new part, but I guess the probe made better contact than the motor end of the connector.
Live and learn. nevertheless, I guess I still saved some over taking to the shop and I have new regulator and motor and a spare.