ignition upgrades

Ok i need everyones opinion on ignition upgrades. Msd, Crane or holleys Annihilator.Whats good, what sucks whatever...

thanx alot guys(and girl(Ami))


gunnmen01

I've heard alot of good stuff about MSD, which is why I'm going that route... Full MSD setup would probably cost you around $200 if you hunt around for good deals (MSD ignition control, MSD Blaster 2 Coil, MSD modified distributor cap).

I went all MSD. I got he MSD SCI ignition controller, MSD blaster coil, and the MSD modified dizzy cap. I definately felt alot smoother ride in the higher rpm

Well i heard lots of good stuff on electromotive but expensive...

MSd 6al box? Is that what i need?

The 6A is the basic MSD ignition. The 6AL has a built in adjustable rev-limiter... If you want the rev-limiter, go with the 6AL, but if not, the 6A would be just fine.
The 6T is mainly for off-road or high-vibration extreme conditions operation.
The 6BTM is for forced induction engines and includes a control for retarding the timing up to 3°.

As far as the other stuff you need:
Modified distributor cap (part number: MSD-8290)
MSD Blaster, Blaster 2, or Blaster 3 Coil

Hey thanks ci5ic that the answer i was waiting for...


gunnmen01

I have the MSD set-up including SCI w/ rev limit box, High-vibration coil(can be mounted in ANY posistion unlike others on the market), modified distrib. cap w/ external coil hook-up, & 8.5mm SC wires. The controller box requires cutting & splicing wires in & out side of the cap. Very simple hook for all parts. I have some pics of the finsihed install but need to scan them & shit. soon i will post a few.

Accel makes a kit that requires no cutting/spicing of any wires. Every thing comes with connection to fit OEM parts. Seems like a simple install. Do know of any one w/ that set-up

msd kicks ass... it was close to 300 with the box, the coil the cap and the wires, but it made starting a lot easier and smoother, the engine ran smoother over all + slight gas milage increases... but it def. looks hella cool in the engine bay too though

i have the box & coil hidden from view. box is installed behind the glove box & the coil is mounted under the CAI tube. only down side of having the box inside the car is the noise.