What mods do you have to your seven?
jcsaleen
01-04-2007, 04:17 PM
What type an mod's do you have to your seven?
Model:
Package:
Mods:
Ports an rebuilds too ~
_________________________
Model: 1993 Montego blue (FD)
Package: Touring
Mods ~
Exterior
Hks SMF Intake (Yellow)
Pettit unlimited ECU
Pettit AST
Earl's oil cooler 15x5 (16 row)
Earl's SS lines
Samco Intercooler Tubes
Koyo oversize radiator
3 inch SS Downpipe
3 inch SS Midpipe
Racing beat Catback (DT)
Autometer boost gauge
J&S Knock sensor/airfuel guage
Rx7store silicon hoses
Front strut-bar (3 bolt)
Odessy battery
NGK wires 8mm
NGK plugs leading & trailing
Exterior
Re amemiya N1 hood (fiberglass)
99 spec tails
R1 lip
Kouki turns
Carbon heat plates
Custom
New front end ~ Custom titanum part a 20B X subframe brace as well
as a rear lower cross bar also titanium cast. Other braces like lower
replacements will be replaced by racing beat stuff.
New foglight layout ~ New custom front Rebar will be made.
Custom cold air ducting (coolant resevoir relocation to opposite side &
Windshield fluid eliminated N1 hood doesn't have sprayers) All sensors
removed on the front end and HKS TP will be installed for more juice.
Cruise control eliminated an 99 spec Efini wheel is installed.
Drilled out Rear Rebar for less weight.
Total weight loss will be around 150 -250 lbs with the boses an sound proofing removed.
~ Overall exterior appearance will be stock except the hood an tails ;)
Model:
Package:
Mods:
Ports an rebuilds too ~
_________________________
Model: 1993 Montego blue (FD)
Package: Touring
Mods ~
Exterior
Hks SMF Intake (Yellow)
Pettit unlimited ECU
Pettit AST
Earl's oil cooler 15x5 (16 row)
Earl's SS lines
Samco Intercooler Tubes
Koyo oversize radiator
3 inch SS Downpipe
3 inch SS Midpipe
Racing beat Catback (DT)
Autometer boost gauge
J&S Knock sensor/airfuel guage
Rx7store silicon hoses
Front strut-bar (3 bolt)
Odessy battery
NGK wires 8mm
NGK plugs leading & trailing
Exterior
Re amemiya N1 hood (fiberglass)
99 spec tails
R1 lip
Kouki turns
Carbon heat plates
Custom
New front end ~ Custom titanum part a 20B X subframe brace as well
as a rear lower cross bar also titanium cast. Other braces like lower
replacements will be replaced by racing beat stuff.
New foglight layout ~ New custom front Rebar will be made.
Custom cold air ducting (coolant resevoir relocation to opposite side &
Windshield fluid eliminated N1 hood doesn't have sprayers) All sensors
removed on the front end and HKS TP will be installed for more juice.
Cruise control eliminated an 99 spec Efini wheel is installed.
Drilled out Rear Rebar for less weight.
Total weight loss will be around 150 -250 lbs with the boses an sound proofing removed.
~ Overall exterior appearance will be stock except the hood an tails ;)
drftk1d
01-06-2007, 11:00 AM
Mine is stock but I have a shit ton of parts laying around for me to finally get my motor back
ghostrx7
01-06-2007, 11:45 AM
most parts listed in my sig. got alot of stuff, but im hesitant to add the major upgrades due to fear if reliability. ive had a safcII in my room for about a year. i think im gonna get her painted, get some volks, then worry about the turbo, ecu, radiator, intercooler, injectors, ignition, fuel setup..... i spent so much already im trying to catch up with my funds...lol
Automotive Network, Inc., Copyright ©2026
