Our Community is 940,000 Strong. Join Us.


power steering problem on chrysler sebring


tazze10
12-30-2006, 08:59 PM
have replaced p/s pump and hoses,but still very hard to turn steering wheel and sluggish.Out of ideas. HELP!!!!

curtis73
12-30-2006, 09:21 PM
Leaking rack? Bad actuator valve?

Its possible you have a bad rack. It could be leaking internally past the seals. Its also possible that the valve that controls how much pressure and where it goes is bad. If its stuck it won't send pressure when you turn the wheel.

tazze10
12-31-2006, 07:24 AM
Leaking rack? Bad actuator valve?

Its possible you have a bad rack. It could be leaking internally past the seals. Its also possible that the valve that controls how much pressure and where it goes is bad. If its stuck it won't send pressure when you turn the wheel.thanks for the help.I thoughtnof that,but hoping it wasn't that xtreme thanks again

UncleBob
12-31-2006, 01:41 PM
often refered to as "morning sickness", bad rack.

Not the funnest thing to change on a sebring.

hundahunta
12-31-2006, 05:25 PM
good luck, you need to drop the subframe.

Add your comment to this topic!