Some purchases on impulse

Yea so I finished an exam and was in a good mood and my buddy was bothering me to order him a boost gauge (cause he doesn't got a CC).
So I called up the friendly folks at ExtremePsi and ordered a boost gauge. Then he goes is there anything else you need and I thought to myself shit when in rome! So I ordered an Act 2600 clutch kit with sprung 6 puck disk, and an AEM UEGO 6 in 1 A/F guage with bosch 02 sensor.
Now I have never replaced an 02 sensor I was just wondering if anyone had any vfaq like hints to make it go as smoothly as possible. Thanks guys.
Take it ez

Impulse buying is the best.. I had my G/F buy me some new cams today for christmass! I have a rear-02 install how-to on my googlepage.
http://scottjsee.googlepages.com/plx-m300

I'm going to be buying the 2600 pretty soon too, good choice..

I thought I had to use the front 02

Either or. It' upto you. I sellected the rear o2 becasue I wanted to keep the stock like LTFT tunning with the front o2 and tune WOT from the rear-02 location.

Alot of people seem to think our front o2 location is to close to the turbo and will kill the wideband quicky, others have had no problems with their widebands up their. I didn't feel like trying it out..

where is the front 02 harness that one looks like a bitch to get at especially with power seats.

Either or. It' upto you. I sellected the rear o2 becasue I wanted to keep the stock like LTFT tunning with the front o2 and tune WOT from the rear-02 location.

Alot of people seem to think our front o2 location is to close to the turbo and will kill the wideband quicky, others have had no problems with their widebands up their. I didn't feel like trying it out..

werd, try to get 18inches + behind turbo

The front o2 harness right behind the thermistat housing. You need a small 10mm wratching wrench to get it off. It's a PITA! I fuck'n zipties the POS back when I still had 02's..

Haha ok thanks its the rear o2 for me thanks guys. That site is gonna help me out a ton thanks scottsee. Only one thing did you have power seats? cause I think thats gonna just make everything that much more complicated.

yeah, I have power seats. It's not a big deal, their are only 2 connector.

ok sweet. I got my package today!! Can't wait to install it!

6 puck disc is very bad for a stock tranny and everyday drive.

Kevin did a big right up on this when i was going to get one and told me the bads of buying it. It basically tares the tranny up. Let me see if i can find that post.

could it be this ? http://www.automotiveforums.com/vbulletin/showthread.php?t=585511&highlight=6+puck

could it be this ? http://www.automotiveforums.com/vbulletin/showthread.php?t=585511&highlight=6+puck


Not exact but something like he said, he had more detail in the thread i posted in. I wish i could locate it. But hopefully it works out for you.

i have a 6 puck and it really isnt any different than any clutch ive had before other than it grips almost instantly its that quick.

not really any chatter at all and after 15k miles my tranny is still fine