DA integra knuckles

i need some advice about putting DA integra knuckles for my Crx Dx. im planning in swapping in them over since im swapping a B20b motor into it. they're bigger and positive camber if swapped but the car would be lower so the camber shouldn't be a issue right? i just need advice and ideas if i should do it. swap the whole knuckle with the calipers and the control arm of a integra. Anybody have any comments?

you'll have to use the calipers from the teg, I wouldnt use the control arms. The camber does not go possative, but it will throw off your alignment.