cluth bleeding

having trouble bleeding the clutch system... just replaced everything, master slave the whole clutch line fork arm clutch kit and now all i gotta do is bleed it... it is starting to get on my nerves.

Best bet is the use of a power bleeder. Otherwise join [email protected] - there was just a fairly long thread on the topic with a number of good approaches.

look on the v8 archie site he has it layed out in laymans terms it works well the problem is the bleeder is located on the wrong end of the slave cylinder so you must press the clutch pedal down and hold it open the bleeder then grab the slave cylinder rod andpull it back into the cylinder then close the bleeder to get all air out of the system most books leave that last step out
Charlie