1994 blazer steering shaft moves fiber spacer
dmacl
11-13-2006, 07:10 PM
having a problem with loose front end. replacer pitman arm and old steering box. tightered up a lot but steering whel moves back and forth. read a thread on replacing shaft with on from a jeep but it was for a 95 and up. he said one from a wrangler would work for pre 94 has anyone done this and have photos and info on it? thanks
JoulesWinfield
11-15-2006, 08:31 AM
Its the rag joint that is worn out. Im not sure if the 94 is the same as 95 or not.
The best way to go IMOP is to get a solid shaft instead of one with the rag joint as it will just wear out again.
On a side note, I turned mine into a solid one by bolting through the rag joint in four places. I wouldnt recomend this because if you screw it up you could loose the ability to steer your vehicle.
The best way to go IMOP is to get a solid shaft instead of one with the rag joint as it will just wear out again.
On a side note, I turned mine into a solid one by bolting through the rag joint in four places. I wouldnt recomend this because if you screw it up you could loose the ability to steer your vehicle.
Automotive Network, Inc., Copyright ©2026