Maf combatability
agcneo
11-13-2006, 10:12 AM
ok so i was in a junk yard the other day, and saw a 99-02? blazer sittin there. i need a new maf and cat. that part happens to be on both of them. i opend the hood and it has the same 4.3 vortec on it as my 97. does anyone know for a fact that there compatable?
MT-2500
11-13-2006, 02:56 PM
ok so i was in a junk yard the other day, and saw a 99-02? blazer sittin there. i need a new maf and cat. that part happens to be on both of them. i opend the hood and it has the same 4.3 vortec on it as my 97. does anyone know for a fact that there compatable?
Call your local auto parts store and see if they list the same no for both.
Or the salvage yard should have a inter change book.
96-02 may be same but double check
Call your local auto parts store and see if they list the same no for both.
Or the salvage yard should have a inter change book.
96-02 may be same but double check
firepaw
11-14-2006, 05:47 PM
According to the NAPAonline site both years use the same p/n MAF sensor. Did you try to clean yours yet? Search this forum for more info. I just cleaned up mine last week - and no more "lean burn" code.
Tom
Tom
blazee
11-14-2006, 06:08 PM
You can see compatible vehicles on ACDelco.com. There are 295 vehicles that use the same sensor.:
http://198.208.187.182/internet/VehiclePartFits.jsp?autosel=A&part=213-352
http://198.208.187.182/internet/VehiclePartFits.jsp?autosel=A&part=213-352
agcneo
11-15-2006, 03:36 PM
holy wow!! thanks for that list. thast awsome!
wafrederick
11-15-2006, 04:05 PM
Buy a new cat and do not throw the old one away.The old cat is worth about$90.00(for GMs) from a buyer that buys old cats.
swgeno
11-16-2006, 02:17 PM
I have an 87 blazer that just has a vaccum port on the maf sensor. How could you clean it?? Or just replace it??
MT-2500
11-16-2006, 03:03 PM
I have an 87 blazer that just has a vaccum port on the maf sensor. How could you clean it?? Or just replace it??
You have a MAP sensor there not a MAF sensor.
If it is bad just replace it.
Map sensors are vacuum operated ad MAF sensors are electrical.
You have a MAP sensor there not a MAF sensor.
If it is bad just replace it.
Map sensors are vacuum operated ad MAF sensors are electrical.
Automotive Network, Inc., Copyright ©2026
