The Project

So here are a few pictures of the Talon, can somebody tell me how bent the front appears to be.. and also post some pictures of the front end of your 97 Talon without the bumper cover and such..

<http://i5.photobucket.com/albums/y192/Moserr/Picture007.jpg
http://i5.photobucket.com/albums/y192/Moserr/Picture001.jpg

Any suggestions on what to do with this:
http://i5.photobucket.com/albums/y192/Moserr/Picture002.jpg

So, should I attempt to fix this up, or not? Note: it was a cheap car to begin with.

Also, I have a problem(s).
1. Some of the bolts have rusted and when I try to take them off, they broke where they were, any idea on how to get them out?? They are the bolts that hold the fenders on. And some of the bolts just keep turning and don't loosen or tighten.

There is no way to tell frame damage by a picture. If its frame is bent, part it. Its just a 420a DSM anyway, I would strip it of the useful parts and sell them off and hopefully you can turn a profit, maybe enough to buy a slightly broken 1g AWD.

:1: for a part out

1) Doesn't look too bad from the pics but a bodyshop will be able to tell you exactly whats wrong with it.

2) Bodyshop will have to fix that bent piece to get it back within the specs it's supposed to be at.

3) Heat up the bolts with a torch and use an easyout to get them out.