B16A Mounts

Anybody know who makes good mount kits for a B16A Swap and are they bolt on or would I need to weld anything?

Hasport and Innovative Mounts. They are all bolt-on applications.

You chould just use the b-series drivers side mount (and bracket that attaches to the block), a rear bracket from a usdm B-series, and the rest are D-series mounts (including the rear). Energy Suspension makes replacement bushings, if your old ones are bad. And that might end up being less expensive than buying a whole mount kit. Just something you might want to think about.

if you do use the stock mounts... but want a stiffer mount and dont want to spend the money buy some 3M Window Weld (its polyurethane) and tape one side shut and fill the mount..if u do a search there are a couple threads somewhere with a How-To

There's no using the stock mount's, I don't have all of them and the ones I do have are shot. I'll look into what you said civicspoon. Is the USDM B series mount on the driver side only the top with the bracket or is it only the bracket and what about the lower mount?