cruise stopped working

:shakehead :banghead: Dear, all.
I have got 1995 GMC Yukon 5.7V8 4WD.
Never had any problems till now - Cruise stopped working completely! Checked the connection to the throttle body (batterflly) connected, checked fuse for the cruise - not burned . R there any other places for the electrical cruise control parts to be checked or what should aI do in this situation??
Please kindly Help!!

Did you happen to recently change your tail lights out to LED's. A lot of people who have changed to LED tailights no longer have cruise control on their trucks. You have to put a resistor on when changing the lights so the cruise will once again work.

What about the cruise/turn signal/windshield wiper stalk on the steering column? I used to have a 98 truck where you could set the cruise by pushing in the button, but couldn't increase speed by sliding that little lever like it was supposed to. I've seen them available aftermarket on ebay in the $80 range, but you might find one at a salvage yard just as easily.