need to remove crankshaft pulley bolt. right or left

can any body tell me. it is so hard both ways I want to know which way is correct. thanks

right

You may need to go some where they have an impact wrench if you don't have good tools. Some times you need a chain wrench to hold the pulley.
Some times you can use a large screwdriver against the flywheel teeth by the starter. Rember righty tighty lefty lucie.

Ditto on the flywheel. Remove the inspection cover at the flywheel and use a screwdriver or other object to wrench in there and hold it in place. Once it is held you will find the crank bolt fairly easy to pop off... unless some moron used gobs of loktite.

thank you all for your help