gauges

i'm looking for a new gauge face and the only ones i could find were the ones that had a tach. my car doesn't have the tach on the stock gauge face and i was wondering since i would have to put the needle and everything in if i would be able to do it myself or if i would have to buy a new whole gauge housing that will have all the needles needed. or if i would be able to find a gauge face that doesn't have the tach on it. websites for that part would be greatly appreciated

Are you talking about an overlay like this...
http://images.channeladvisor.com/Sell/SSProfiles/10059963/Images/RIG-260.jpg

Or are you talking about a new cluster, like this...
http://i9.ebayimg.com/01/i/08/8e/5b/41_1_b.JPG

i was looking at the overlay. i've started painting my interior and i figured it would make it look alot better once i figure out if it is my speed sensor or something else that's making my speedometer and odometer work. they turn on and off from time to time

i was looking at the overlay. i've started painting my interior and i figured it would make it look alot better once i figure out if it is my speed sensor or something else that's making my speedometer and odometer work. they turn on and off from time to time
If both your speedometer and odometer aren't working, then it's your VSS.

i could probably do that myself couldn't I. Since all you do is plug it in right?

i could probably do that myself couldn't I. Since all you do is plug it in right?It is held in by a 10mm bolt and you have to take it out very carefully. If you buy a sensor from someplace like Autozone or NAPA then you will have to splice the wires for the new connector. Try and get one from thr dealer.