changing crank position sensor
chadwick_90
10-12-2006, 07:11 PM
I was just wondering how to replace a cps and where it is located. Also where would i be able to buy a new cps and what brand should I get? please help
MT-2500
10-12-2006, 08:12 PM
I was just wondering how to replace a cps and where it is located. Also where would i be able to buy a new cps and what brand should I get? please help
Remember dealer OEM parts only hurt one rime.
Cheap aftermarket stuff can bite you in the rear many times.
Tips on getting a good answer to your questions.
People trying to answer your question do not have a crystal ball.
So give them all of the info you have like year make and model and engine and transmission.
Also service cars engine and transmission service history or any recent repairs or problems.
Also a description of your problem and what it is doing or not doing.
If you have codes give up the code no.
And remember a code does not say replace the part but only points to the problem that you have to check out.
So to better help you give up all of the info you have on it.
MT
Remember dealer OEM parts only hurt one rime.
Cheap aftermarket stuff can bite you in the rear many times.
Tips on getting a good answer to your questions.
People trying to answer your question do not have a crystal ball.
So give them all of the info you have like year make and model and engine and transmission.
Also service cars engine and transmission service history or any recent repairs or problems.
Also a description of your problem and what it is doing or not doing.
If you have codes give up the code no.
And remember a code does not say replace the part but only points to the problem that you have to check out.
So to better help you give up all of the info you have on it.
MT
chadwick_90
10-12-2006, 09:04 PM
It is a 1990 chevy lumina euro 3.1 if i knew codes i woulda posted but i dont think codes are necessary information for somone to tell me where a crank position sensor is and how to replace it. Still my question is where is the crank position sensor on a 1990 chevy lumina and how to I replace it lol if anyone knows how to do this please get back to me thanks
jeffcoslacker
10-13-2006, 06:58 AM
Under hood, center, rear engine area, passenger side
of exhaust pipe, above oil pan, mounted in engine
block
of exhaust pipe, above oil pan, mounted in engine
block
MT-2500
10-13-2006, 08:43 AM
It is a 1990 chevy lumina euro 3.1 if i knew codes i woulda posted but i dont think codes are necessary information for somone to tell me where a crank position sensor is and how to replace it. Still my question is where is the crank position sensor on a 1990 chevy lumina and how to I replace it lol if anyone knows how to do this please get back to me thanks
We were only trying to help.
But to help we need info.:grinyes: :lol:
Code can point you to the real problem.
Here is the best info you can get on replacing a crankshaft sensor.
http://www.alldata.com/products/diy/index.html
Good Luck
MT
We were only trying to help.
But to help we need info.:grinyes: :lol:
Code can point you to the real problem.
Here is the best info you can get on replacing a crankshaft sensor.
http://www.alldata.com/products/diy/index.html
Good Luck
MT
chadwick_90
10-13-2006, 02:33 PM
alright thanks guys
mgutierrez1113
11-27-2006, 11:41 PM
I was just wondering how to replace a cps and where it is located. Also where would i be able to buy a new cps and what brand should I get? please helpplease
Automotive Network, Inc., Copyright ©2025