replacing fog light bulbs
Tonyr
10-09-2006, 05:03 PM
What is the general procedure for replacing these bulbs? It looks like you have to unscrew a few things on the skid plate to access the fog lights.
xeroinfinity
10-10-2006, 07:28 PM
Hey Tony !
Didnt know if you had gotten those out yet.
You can reach them through the front, tho its a PITA to loosen and tighten them.
Best to loosen that bottm panel piece under the corners.
They can be a bear to get out and back in, good Luck !
Didnt know if you had gotten those out yet.
You can reach them through the front, tho its a PITA to loosen and tighten them.
Best to loosen that bottm panel piece under the corners.
They can be a bear to get out and back in, good Luck !
Tonyr
10-10-2006, 09:02 PM
That's what I figured. I would loosen those screws and take the black skid panel or whatever it is off and be able to get to it then.
Thanx Xero, you're very helpful!
Thanx Xero, you're very helpful!
xeroinfinity
10-10-2006, 10:59 PM
Ya thiers those rubber flaps things :gay:
They do keep rain and debrie out tho.
You can reach them from the middle, just not alot of room to work, as with most things on these cars.
They do keep rain and debrie out tho.
You can reach them from the middle, just not alot of room to work, as with most things on these cars.
Automotive Network, Inc., Copyright ©2026