1988 Cherokee Pioneer Project

Hello all,

Thanks for any help you have given so far, and the future help I hope to get. I have been on here a couple of times, and posted a few. Here is my website link with my 1988 Jeep Cherokee pics from after I installed the Pro Comp 3" Suspension lift. I am about to do more, and will pst new pics as soon as I can.

http://raceghost.myftp.org/gallery/Jeep.html

Here is a cool site you may or may not have heard of, but they have a lot of Jeep parts....

http://www.thepartsbin.com/

Just ordered all these parts from "The Parts Bin"...Keep you posted on how shipping goes and quality when they get here.

Power Stop Cross Drilled Brake Rotors
http://performance.thepartsbin.com/basket.php?makeid=14&modelid=149&year=1988&partid=78&brandid=2234

Power Stop Brake Pads
http://performance.thepartsbin.com/basket.php?makeid=14&modelid=149&year=1988&partid=12&brandid=2234

Jacobs Distributer Cap and Rotor
http://performance.thepartsbin.com/basket.php?makeid=14&modelid=149&year=1988&partid=473&brandid=1982

Nology Profire Ignition Coil
http://performance.thepartsbin.com/basket.php?makeid=14&modelid=149&year=1988&partid=10&brandid=2210

JACOBS-SPARK PLUG WIRE SET - Pro Fit Silicone
http://performance.thepartsbin.com/basket.php?makeid=14&modelid=149&year=1988&partid=4&brandid=1982

Looks like it's shaping up well! Thanks for the parts site address....

All the goodies I ordered....

Jacobs stopped producing the wires and the cap and rotor assembly. Parts bin only had the accel stuff. I think I might go with some MSD wires, or if any one has a better suggestion...?

Plus, the 80/140 amp high output alternator, the birth certificated showed the tested amperage to be 88 amps at 1500 RPMS idle, and 160 at 6000 rpms. I know my jeep revs a little slower on the idle, and I think they top out near the range, so hopefully I made a good choice on that.

http://raceghost.myftp.org/My%20pictures/jeep/IMG_1905.JPG

http://raceghost.myftp.org/gallery/Jeep.html

Well, I got all the parts installed!!! :grinyes:
80/140 amp high output alternator
Accel Distributer Cap
Accel Distributer Rotor
Accel Spark Plug Wires
Bosch Platinum Spark Plugs
Power Stop Cross Drilled Rotors and Pads
New Water Pump


I have the Nology High Output Coil, but need a wiring diagram to get installed, do to the integrated 3 conductor plugs on the stock coil...:uhoh: ...Anyone....Anyone...

I still need to by the Yellow Top battery.

I am looking into Rhino Coating the Outside, or Linex-ing the outside. Then I will tint the windows.

Then, next year I will start on the interior. I have plans for a full internal Roll Cage, with 4 Bucket Seats, with 5 point harnesses.

Rock on fellas,

L8's,

Raceghost