what my 1/4 time stock

:rolleyes: hey guys i was wondrign what my 1/4 times was i have a camaro z28 1994 it has an at tranny thx guys please let me know:devil:

We'll we'd have to know your rear-end ratio's , trans. type , eng. type, induction, tire and wheel size !!!!! ther3e are many factors to getting your 1/4 time , your best bet would be to mark off a quarter mile on a deserted road , and have a passenger clock you with a stop watch , otherwise your shit outta luck!!!! Hope I helped you out!!!

Mid to low 14. GM High Tech performance recently purchased a 94 Z with 2.73 rear and ran a 13.7 @ 98 mph supposedly stock. THey must have had some serios traction. From what i've seen for stock auto LT1's, low 14's at best.

i just bought flowmaster for it will tha help my time at all or just for the sound?

Pretty much for sound, you may see small gains, but that could be cancelled out easily by track conditions...

hey i was wonderign if a slp intake will help my time at all then or just a nother waise of money thx for the fast answers

You mean the SLP CAI? or the lid?

like the intake kit for it from speed in the 1st thing on there got the two filters on the end

Well, I'm not sure exactly what you're talking about (punctuation and complete sentences would help), but in answer to your question: you may see some gains, but unless you've done alot of work to your engine, you probably won't see much of a benefit at the track. A really warm day would negate any advantages it gave you...

would taking of the cat do any thing for me for the track
or how about soem 4:10 gears

Getting rid of your cats would help, cause that means less restriction of your exhaust system. Some back pressure is good, but removing the cats would give you slight gains, and make it louder.

Putting 4:10's on your car would give you the biggest gains, but with that you'd also probably have to put SFC's and a 12-bolt rear end on it. That way you don't tear your car apart when you launch so hard. You'd probably see a bunch of tenths drop off with 4:10 gears.

hey do u know any thign about the B&M Shiftplus Shift improver 4L60E & 4L80E that woth getting

Not really. I don't know anything about those. One person that might would be Blackbird01, but I haven't seen him post on here very often lately. You could always try PM'ing him...

thx for the fast respond