15" Kicker S15L7 D2

Brand:Kicker
Condition:New
Impedance:2 Ohm
RMS Power Handling:1000 Watts
Peak Power Handling:2000 Watts
Size :15 Inch

Would this speaker match this amp? There is an 4 Ohm version of that kicker also.
http://pics.ebaystatic.com/aw/pics/globalAssets/ltCurve.gif

LANZAR 800 WATT RMS/1000w MAX CAR STEREO AMPLIFIER AMP


2 x 400 Watts RMS at 2 Ohms
2 x 500 Watts Max at 4 Ohms
1 x 1000 Watts Max at 4 Ohms Bridged
Electronic Crossover Network
Bass Boost Circuit
Variable Phase Shift Control
2 Ohms Stereo Stable
Anti-Thump Turn-On
Soft Turn On/Off
High & Low Level Inputs
Blue Light Illuminated Crossover Control
Power & Protection LED Indicators
Advanced Protection Circuitry
Bass Boost Remote Control
T.H.D: 0.04%
S/N Ratio: 90dB
Channel Separation: 65dB
Frequency Response: 5Hz- 35kHz
Dimensions: 10.47''W x 2.46''H x 12''L

lanzar is overrated, but if you went with that amp you would need the 4 ohm version of the kicker.

I vote no. the specs you put don't seem right and I would try to get a lot closer to that 1000 rms.

lanzar is overrated, but if you went with that amp you would need the 4 ohm version of the kicker.

what do you mean by over rated, will it put out 1000watts like it says?

The most that amp will push is 1000 watts Max. Your sub wants 1000 watts all the time and 2000 max. And he means the name is over rated.

The most that amp will push is 1000 watts Max. Your sub wants 1000 watts all the time and 2000 max. And he means the name is over rated.
Well a friend of mines has this same 15", he knows nothing about amps or speakers, it just came with the car. The sub is perfect. All im asking is can this amp do the job. This speaker is a dual 4 ohm, and when they say bridged, do I have to wire both sides of the speak as one, and both of the channels as one?

That sub needs like two of those amps.

So this picture should be your sub. Now I think in your specs it should say 1 channel with 1000 watts MAX should be 2 ohm. So if your speaker is indeed a dual 4 ohm and you wire it like the pic it will present a 2 ohm load to your amp. Which you will have 1000 watts MAX. It will work with your speaker but I don't recommend it.

http://i2.photobucket.com/albums/y44/nicholas_mal/l7.jpg

So this picture should be your sub. Now I think in your specs it should say 1 channel with 1000 watts MAX should be 2 ohm. So if your speaker is indeed a dual 4 ohm and you wire it like the pic it will present a 2 ohm load to your amp. Which you will have 1000 watts MAX. It will work with your speaker but I don't recommend it.

http://i2.photobucket.com/albums/y44/nicholas_mal/l7.jpg

So basically, the 4 ohm speaker = 2ohm load and it wil be recieving 800 watts? I'm just trying to find the right amp for this speaker

Do you already own this amp or are you looking for a new one? I used a jbl 600.1 gti which ran about 580rms. And I had a s12l5 which needed 600 rms. If you are looking for a new amp I would definetly not buy that one. I would look for something with 1000 rms or something closer.

Do you already own this amp or are you looking for a new one? I used a jbl 600.1 gti which ran about 580rms. And I had a s12l5 which needed 600 rms. If you are looking for a new amp I would definetly not buy that one. I would look for something with 1000 rms or something closer.

As soon as I can find the amp ill click buy and its all set and done.
With this amp would I need the 2ohm version?
VISONIK V408XT 1000RMS 2 CHANNEL BRIDGEABLE CAR AMP

2 channel car amp
1000 watt peak output
500 x 2 RMS @ 2 Ohms
250 RMS x 2 @ 4 ohms
800 x 1 RMS @ 4 ohms
MOSFET power supply and output stage
preamp input and output
fuse rating: 25A x 2
12-13/16"W x 2-1/2"H x 10-5/16"D
50Hz - 250Hz Low Pass Filter
Built in high and low pass crossover system to fine tune speaker frequencies
Variable Bass Boost 0-18dB
Subsonic Filter 20 - 50Hz
Fuse Rating: 25A x 2

Variable Bass Boost 0 - 18dB @ 45 Hz
Power/Protection LED
RCA Line Inputs & Outputs
Thermal/Short/Overload Protection Circuitry
Adjustable Input Sensitivity
Full MOSFET Circuitry
Frequency Response: 20Hz - 20kHz
THD <0.05%

How much are you looking to spend and what site are you at?

How much are you looking to spend and what site are you at?

Ebay!