1988 C4 corvette replacing brake light bulb

Greetings

I just picked up an '88 Vette Ragtop today and as My wife followed me home she notice I had a brake/turn signal bulb out. How to you get to the back of the fixture to replace the bulb since there is no trunk?

Hopefully you have long skinny arms , or find someone that does. For the inner lights, go through the license plate opening . You can reach the outer light from the license plate hole too, but its much easier to reach up above the muffler , while laying on the ground. Thats how I used to do it.

been there done that..the inside blub u can get to through with the tag off....the outside bulbs loosen the rear inner fender skirt an u can reach right through there to get to the bulb

been there done that..the inside blub u can get to through with the tag off....the outside bulbs loosen the rear inner fender skirt an u can reach right through there to get to the bulb I realize this is an older post but this answer really helped me this week on my 85 Vette with the outer turn signal..

been there done that..the inside blub u can get to through with the tag off....the outside bulbs loosen the rear inner fender skirt an u can reach right through there to get to the bulb
Well I thanked you for this advice yesterday but tried that method today and it didn't work on my 85. There was just too much junk back there to even see the light. Looks like the only way for me is to find someone who has a skinny arm and go up under the bumper..