Updates!

got the hood closing, 2 hood hinges and a latch fixed that, found some of the ground effects, got both the door pieces in the right color, now all i need is the lower passenger side rocker mounted dround effects, bought a new driverside door handle, finally got the car started, module in the HEI was shot, so i built, blueprinted and tested a new distributer, car fired right up, sounds good, picked up my heads and intake, still trying to find my crank, got some of my other parts, found a parts car, 83 or 84 f41 camaro, im pullin the carpet, dashpad, and center council out of it, and whatever else i can think, then you guys can have what you want out of it, got the interior cleaned up nearly,(about 3 entire cans of dr.pepper spilled in it ALL OVER, seats cleaned up nice, carpet is shot, same with dashpad, both door panel top, outer window sweeps, car needs new door and hatch weatherstriping
pics!!!!
http://i4.photobucket.com/albums/y119/92caprice/IMG_0296.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0297.jpg

Sweet, looks better each time you post some pictures.

thanks!

Third gens are great. Enjoy it and good luck finding the parts! I will say that you'rs looks better than mine, considering the suspension is all effed up on mine, but yours looks fine.

Lookin' real good there, alkyboy :) ..

Everytime I look at one, the more I want a 3rd gen. It would be fun to have one methinks.

still trying to find my crank,

Oh man, is htere fun to be had with that one :lol2:

Look'n good tho :thumbsup:

as i wrote that, i was thinking to myself, either you or jim would have something to say about it. lol

I saw that, but I wasn't going to touch that one with a ten-foot pole (pun not intended). You're going to have enough "fun" with it already, and don't need any "help" like that.

So, how does shoe leather taste, anyway? ;)

lol, you would think that i would know

as i wrote that, i was thinking to myself, either you or jim would have something to say about it. lol

Would you expect anything less :dunno:

You of all people should knwo from dragracing, consistancy is the key to successs. :grinyes:

By the way, next time, don't leave your hood prop laying in the picture :icon16:

funny thing is that actually is my hood prop, guess i eed some hood shocks

sounds like its going smooth, man. Thats good to hear after alot of badnews from other blue thirdgens with a red front fender.

BTW why does your sig look so f-ed up?

i dont really know

Good luck getting it finished up!

Does the F41 still have the bigger sway bars? I'll take them if you don't need them and their just laying around....

if it does and i dont need em you have got first dibs

better rally?

if it does and i dont need em you have got first dibs

sweet.... I miss the way my old f41 handled :frown:. I'm not rally but I like the new sig, I love pics that are taken on the angle the right pic is on. That corner angle makes thirdgens look really badass.

indeed it does look sweet, btw rally HOW THE HELL DID YOU GET MODDED!?!?!?!?! AHHHHH its driving me crazy everyones getting modded it seems!

indeed it does look sweet, btw rally HOW THE HELL DID YOU GET MODDED!?!?!?!?! AHHHHH its driving me crazy everyones getting modded it seems!

Because ive been pimping, since been pimping, since been pimping.

Poor and I pimp and we get in trouble.

Poor and I pimp and we get in trouble.
i think he gave igor head or something

Poor, No! I told you NO!

lol

i think he gave igor head or something
Not only Igor, I mean what are you talking about :uhoh: . Also the car is looking good and I bet it will be bad ass when your done.

Ok guys try to keep it somewhat on topic and not who pimps who out...lol. Even though rally had to have a lil favor to someone...lol

ahh gold got modded too, wtf

He's just a power trip 'casue Rally isn't turning tricks for him anymore is all. Carry on.

so in other words rally was pimpin out himself to john and igor, rally i heard jay pays well, maybe you could afford your lt1 swap then

more pics, missing GFX replaced:
http://i4.photobucket.com/albums/y119/92caprice/IMG_0353.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0352.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0350.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0348.jpg
my beautiful dash pad.. lol
http://i4.photobucket.com/albums/y119/92caprice/IMG_0339.jpg
also bought some new parts:
a pillar gauge pod
http://i4.photobucket.com/albums/y119/92caprice/013.jpg
soffseal door weatherstriping
http://i4.photobucket.com/albums/y119/92caprice/57_1.jpg
Speed pro 0.030 over hypereutectic flat top pistons
http://i4.photobucket.com/albums/y119/92caprice/70_1.jpg
and a kit to fix my seatbelts
http://i4.photobucket.com/albums/y119/92caprice/NOSseatbeltbuttonkit.jpg

Man I hate my dash.. its cracked like a mother as well..

i bet mine is worse,lol there is foam comming out of mine in the center and on the sides.

At the edges where the air comes out from the dash, its missing it and only the foam is there..

Car's looking good. Maybe I missed it but what are you planning the car for? Just a fun DD or a track car or are you gonna fix it up real nice and make it an eye catcher?

I traded my old 33 X 12.50 Thornbirds for a mint dash pad. That was a sweet deal cause those tires were worthless.

you talking to me or rally?

I was actually wondering what blownalcoholboy was going to do with with his ride.

Yeah, whats with the stripped doors?

had to pull the door panels to install the GFX, but im not putting back till i get my new watershields, btw im building a bracket racer/DD, heres some of the parts: UMI LCA relocation brackets, UMI tubular LCA's and panhard bar, UMI SFC's, aluminum driveshaft from john, transgo 700r4 shift kit, 2500 rpm stall converter, derale deep cooling transmission pan, moroso tranny cooler, 355ci SBC, forged steel crak 0.010 under, 4340 forged steel h-beam connecting rods, speed pro 0.030 over hypereutectic plat top pistons, com cams k-kit .480" lift I/E, crane 1.5 ratio roller rocker arms, gm 441 heads, 1.94/1.50 manley SS swirl polished valves with hardened tips, all arp hardware, all felpro gaskets, autometer water temp, trans temp, oil PSI and tach, starnge 12-bolt with posi, 33 spline axles, 4.11 gears. hope that gives you somewhat of an idea

Yep, I think that about sums it up, lol. Do you have a certain E.T. in mind you'd like to run in?

mid to low 13's

for now atleast

here are some pics of my new interior, needs a console lid and thats it.
http://i4.photobucket.com/albums/y119/92caprice/IMG_0434.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0437.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0435.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0436.jpg
http://i4.photobucket.com/albums/y119/92caprice/IMG_0433.jpg
BTW the dash pad is mint!, that makes 2 mint dash pads i own now! i may sell one you guys will be the first to know!
http://i4.photobucket.com/albums/y119/92caprice/IMG_0428.jpg

That looks much better!

Damn! That dash looks good.. I need one.. too bad youre in Canada.

very nice. looks like you just need to clean up the black trim pieces.

know anyone that wants a leather t-top bag, with some nice glass t-tops. lol

your car is in much better condition than my car, still need parts though?

"t-top bag with some nice glass t-tops" OMG thanks for reminding me, I need to weld metal in where the t-tops are to add structural integrity, or something.

ok so the car is in hibernation for the winter, to cold to work on it! but heres some pics, ive nearly completely stripped the interior, new carpet and floormats are going to be ordered sometime soon, got a mint dashpad, and a better center console, cleaned all the seat and they look 100% better, got some nicer doorpanels, and i completely rewired the stereo(had some ricer install it before i think) ran the wiring for my autometer gauges. got my new hatch and door weatherstriping from soffseal. my pistons which i paid 45$ for arrived along with my a pillar gauge pod. and i also rebuilt all my seatbelt. but anyways heres some pics:

http://i4.photobucket.com/albums/y119/92caprice/Picture063.jpg
http://i4.photobucket.com/albums/y119/92caprice/Picture065.jpg
http://i4.photobucket.com/albums/y119/92caprice/Picture066.jpg

Cleaning the seats
http://i4.photobucket.com/albums/y119/92caprice/Picture062.jpg
http://i4.photobucket.com/albums/y119/92caprice/Picture112.jpg

Weatherstriping
http://i4.photobucket.com/albums/y119/92caprice/Picture115.jpg
http://i4.photobucket.com/albums/y119/92caprice/Picture116.jpg

some M/T 275/60R15 drag radials!
http://i4.photobucket.com/albums/y119/92caprice/Picture100.jpg
http://i4.photobucket.com/albums/y119/92caprice/Picture096.jpg

gauge pod with autometer z-series 2 1/16" water temp and oil psi(trans temp going in center console)
http://i4.photobucket.com/albums/y119/92caprice/Picture102.jpg

Seatbelts before and after
http://i4.photobucket.com/albums/y119/92caprice/Picture057.jpg
http://i4.photobucket.com/albums/y119/92caprice/Picture060.jpg

some random interior parts and other stuff
http://i4.photobucket.com/albums/y119/92caprice/Picture111.jpg

my new pistons
http://i4.photobucket.com/albums/y119/92caprice/Picture114.jpg



AND FOR YOUR ENJOYMENT(a chevy with a 383 dodge in it)
http://i4.photobucket.com/albums/y119/92caprice/Picture092.jpg
http://i4.photobucket.com/albums/y119/92caprice/Picture091.jpg

Very nice. I have that same model pod for my car. Its from gauge works I believe. I think Mr.Gasket or whoever bought them out now though.

mine is autometer from summit

mine is autometer from summitThats who it was, Yeah , autometers bought them out. They are still made by the same company though its just that autometers bought them out.

im not impressed with mine, dosnt even fit the contour of my a pillar, in fact it fits like shit

The trick to getting them to fit right is to apply pressure on the gauge pod against the trim while drilling the mounting holes. Then when you line it up again to screw in the hole the pod give a tight seal again the trim pillar.

tried that i still have like a 3/8" gap