missing bolt?

2000 3.4L had the intake manifold replaced at a shop and when i lifted the hood it looks like there is a bolt missing it would be located directly in front of the oil filler cap is it missing a bolt?

What year and what engine !!!

that would help emensly :D

2000 3.4

I would think that if a bolt was missing it would leak something....
Heres a pic, maybe You can explain where it is located better by looking this.
http://i28.photobucket.com/albums/c242/xeroinfinity/AUTOMOBILES/99gtundr2.jpg

And Welcome to AF !

a little left of the blue arrow the surface is machined flat and shines brite

do the red and green arrows have bolts in the holes?

Could be the oil tube mount but thats a nut on a stud.

the red and green are just as they are in that pic with nothing in them.

If its between the spark plugs, thats a head bolt!
Better hope its not missing one, could warp the head.

If you still arent for sure, take the thing back to the shop that done the work and ask them nicely If they forgot something.

ok the hole is on the same level as the bracket on the left and the dipstick bracket on the right this vacant hole is in between these two brackets just to the side of the injector. the head bolts are larger and lower

ok the hole is on the same level as the bracket on the left and the dipstick bracket on the right this vacant hole is in between these two brackets just to the side of the injector. the head bolts are larger and lower


that didnt make sense. :confused:

its the blue arrow
the other two arrows hold brackets
i guess nothing goes there

pretty sure the blu arrow should hav a stud in it that holds the dip stick tube, the other two are usually empty.