14b turbo install?

I dont have the 1g water lines to complete the turbo install. my question is, since the 1g water obvieosly comes off of a 1g, do I need to do modify the 1g water lines? I dont think so but I just want to make sure before I anything. thanks

You can use either 1g/2g lines. The last 2 14b's I've had needed slight bending (use a small phillips). Just remember to get 6 copper crush washers from the Mitsu parts department. 4 for the coolant banjo's, 2 for the oil feed banjo.. Don't forget the oil drain tube gaskets & be carefull not to over tighten them, they strip very easy and are a pain in the ass to tap out to a 20UNC 1/4 size... Trust me...