Our Community is 940,000 Strong. Join Us.


HELP! can't find Metro part


bobsketball
08-31-2006, 03:03 PM
I have 1991 geo meto convertable. THE BOLT HOLDING THE AUTO TRANS. TO THE ENGINE CAME LOOSE AND RUINEDTHE SEAL AND BUSHING ON THE TORQUE CONVERTER SIDE OF THE TRANSMISSION. GOT THE SEAL , CAN'T FIND THE BUSHING. EVEN THE DEALER SAYS HE CAN'T GET IT. ANY IDEAS WHERE TO LOOK?:banghead:

idmetro
08-31-2006, 05:04 PM
I'd suggest calling your local u-pull it wrecking yard and see what they might have. Secondarily try http://car-part.com/ When I searched they did not list a special auto trans for the convertible so possibly the same auto trans was used in the vert as in the sedan? Likely someone else on the forum knows for sure (possibly you could get the info from a knowledgable dealer as well) but that is where I would begin. Once you locate one, make a sketch of the location and any measurements you can get (even better take a digital picture) then take the picture and some tools along and go have a look.

nonewcars
09-01-2006, 01:28 PM
Did you try rockauto.com? Theh have the seal and a sleeve. Is the sleeve what your looking for? Don't know what the bushing is or might be called.

Add your comment to this topic!