Our Community is 940,000 Strong. Join Us.


New Radio


Dyno247365
08-29-2006, 01:53 PM
My car needs a new radio for the big trip! I don't know how to get the old one out...how do I? I see slots on the sides, do I use screwdrivers?

I can't take off the faceplate on this one. it's a 3yr old Jensen CD/Stereo.

240SXSlideStar
08-29-2006, 03:12 PM
You pop out the plastic trim piece that goes around the shifter and radio, careful, the mounting tabs are fragile, then you take out the 4 screws holding the headunit in place, supppperrrr easy.

Dyno247365
08-29-2006, 04:19 PM
You pop out the plastic trim piece that goes around the shifter and radio, careful, the mounting tabs are fragile, then you take out the 4 screws holding the headunit in place, supppperrrr easy.

Yeah I grabbed my haynes manual, flipped around a bit and found taking apart the trim, but I didn't know the bottom compartment was attached also.

I've d/ced two connector but I can't find a tool or socket for the small screw in the middle.

Add your comment to this topic!