Fender rolling

Well I've been looking for some new wheels/tires and as I was on my search fender rolling came up and I understand what it is, but dont understand how its done or what its done with and I could use some direction. I also did a few searches incase you guys were wondering.

what size wheel are you looking for ?

I'm looking at 17x8 w/ a +35 offset

you dont need roll fender with that .

stay with 225/45/17

Killer, he might have to roll the fender with that wide of a wheel that has that offset. The size of the tire has little effect on whether the fender needs to be rolled or not, especially if he's getting a wide, deep-dish wheel.

http://cgi.ebay.com/ebaymotors/Enkei-RPF1-wheels-17-X-8-inch-5X114-3-Mitsubishi-Evo_W0QQcmdZViewItemQQcategoryZ43957QQihZ013QQitem Z230021569557QQrdZ1

^those are the wheels I'm looking at and will tire size make a difference?? Tire rack reccomended 215/50's but I was origionally looking at the 225/45's

I'm doing fine with 17x7.5s with 225/45/17s, but the offset is 43mm... I heard something about getting spacers to fit that sort of offset when using RX-7 wheels. Shouldnt a +35 offset be fine with his AWD?

I think the rim should be fine, it just depends on how wide of a tire he decides on. I think a 225 *should* clear but anything more would probably rub.

would a lower profile tire help like a 205/40 or a 215/40??

Yes

i have 235/45R17s and +38mm offset with eibach 1.2" drop (1.5" lower then stock) and my backs rub, i didnt want start another thread, and sorry for bringing this back, but i have access to a fender roller, but no heat gun... can i use a pretty Heavy duty hair dryer if its almost 100* outside temp here already? i know the paint needs to be about 125*-140* to keep from cracking... what do you guys think about this?

I don't know but I need to roll/trim mine, or do something before I bring the camber out of the rear. The look/handling is nice, but the tire wear is killin me.

well... does anyone know? becasue i'm rolling my fenders early this week... like sometime around monday-wednesday? i need to get these wheels on so they wont rub, so i can get going on my brakes!