Vaccum Line Diagram
Jimkat Racing
08-23-2006, 03:53 PM
Does anyone know where I can get a diagram for just the vaccum lines for a 1994 Toyota Tercel? Thanks in advance.
Kathy
Kathy
gator2764
08-24-2006, 06:45 AM
Does anyone know where I can get a diagram for just the vaccum lines for a 1994 Toyota Tercel? Thanks in advance.
Kathy
I have the diagrams but this damn place will not let me post an attachment
Kathy
I have the diagrams but this damn place will not let me post an attachment
Jimkat Racing
08-24-2006, 09:50 AM
I have the diagrams but this damn place will not let me post an attachment
Send it to my email [email protected]
Sure would appreciate it.
Kathy
Send it to my email [email protected]
Sure would appreciate it.
Kathy
IMPORTHUNTER
06-13-2007, 12:26 PM
I need this too, could you send one to [email protected] ? Thanks!
Jimkat Racing
07-28-2007, 08:48 PM
The guys who have emailed me for the Vaccum Line Diagram I'm sorry but I don't any longer have the file that Gator sent me. I lost it when my computer crashed about 6 months ago. I have it now only on paper where I had printed it off. I wish I had a scanner to be able to send it to ya'll but I don't. I noticed that the last time Gator posted was in May of this year. So don't know what has happened to him.
Kathy
Kathy
gator2764
07-30-2007, 06:16 AM
Still here, been busy lately. I will send them to you again if I can find them.
Jimkat Racing
07-30-2007, 11:55 AM
Still here, been busy lately. I will send them to you again if I can find them.
Hey Gator! How have you been? I got the Vaccum Diagram you sent. Thanks again.
You wouldn't beleive I just got my toyota tercel torn down after waiting 9 months. After our last discussion on putting in new rings and new bearings things got pretty busy around here. We bought the place we are living at and started clearing the land off getting rid of these darn pine trees. I don't miss them at all that's for sure, and if you've ever had dealing with pines in your yard you completely understand. Now back to the car. We finished putting in the new rings and bearings this past Friday. I've not driven her alot since we have but the airconditioner now has power to do it's things and it'll freeze your booty off. The car isn't no longer smoking like a steam engine when first cranked up. When we first took the head off this time my clean valves were mucked with stuff that looked like dried burnt charcoal. We cleaned it off and the valves looked fine. Not egg shaped as before. The valves had started chattering and that's probably why. He had the timing set a little off too. I hope I'm set now for a long while. I'll be letting you know how the gas milage is doing. Right now so far I've used only a 4th a tank and it's gone 75 miles. Before it would get only 50 to 60.
Hey Gator! How have you been? I got the Vaccum Diagram you sent. Thanks again.
You wouldn't beleive I just got my toyota tercel torn down after waiting 9 months. After our last discussion on putting in new rings and new bearings things got pretty busy around here. We bought the place we are living at and started clearing the land off getting rid of these darn pine trees. I don't miss them at all that's for sure, and if you've ever had dealing with pines in your yard you completely understand. Now back to the car. We finished putting in the new rings and bearings this past Friday. I've not driven her alot since we have but the airconditioner now has power to do it's things and it'll freeze your booty off. The car isn't no longer smoking like a steam engine when first cranked up. When we first took the head off this time my clean valves were mucked with stuff that looked like dried burnt charcoal. We cleaned it off and the valves looked fine. Not egg shaped as before. The valves had started chattering and that's probably why. He had the timing set a little off too. I hope I'm set now for a long while. I'll be letting you know how the gas milage is doing. Right now so far I've used only a 4th a tank and it's gone 75 miles. Before it would get only 50 to 60.
gator2764
07-30-2007, 12:13 PM
Being originally from FLA I know all about those pine trees. Now I have to deal with these damn swet gum trees!!! Glad to hear you got the car running. I have put almost 50k on mine since the partial rebuild and it gets a pretty constant 36 mpg around town. I ran about 150 miles last weekend behind a charter bus at 80 mph and still got 38!!
Good luck with it.
I am now at 240K on this little car!
Good luck with it.
I am now at 240K on this little car!
Jimkat Racing
07-31-2007, 09:51 AM
Being originally from FLA I know all about those pine trees. Now I have to deal with these damn swet gum trees!!! Glad to hear you got the car running. I have put almost 50k on mine since the partial rebuild and it gets a pretty constant 36 mpg around town. I ran about 150 miles last weekend behind a charter bus at 80 mph and still got 38!!
Good luck with it.
I am now at 240K on this little car!
I know way to well about them damn sweet gum tree's. The balls on those things are as bad or worse than pine cones. We have quite a few around here, but there were more pine trees than sweet gum.
Car is still running great with no oil missin!:)
Kathy
Good luck with it.
I am now at 240K on this little car!
I know way to well about them damn sweet gum tree's. The balls on those things are as bad or worse than pine cones. We have quite a few around here, but there were more pine trees than sweet gum.
Car is still running great with no oil missin!:)
Kathy
gator2764
07-31-2007, 01:46 PM
I know way to well about them damn sweet gum tree's. The balls on those things are as bad or worse than pine cones. We have quite a few around here, but there were more pine trees than sweet gum.
Car is still running great with no oil missin!:)
Kathy
Just curious about something, were the oil rings collapsed when you took the engine apart? Mine were. After changing rings and valve stem seals my tercel doesn't even use any oil between changes(3 to 4k)
Car is still running great with no oil missin!:)
Kathy
Just curious about something, were the oil rings collapsed when you took the engine apart? Mine were. After changing rings and valve stem seals my tercel doesn't even use any oil between changes(3 to 4k)
Jimkat Racing
08-02-2007, 07:03 AM
Just curious about something, were the oil rings collapsed when you took the engine apart? Mine were. After changing rings and valve stem seals my tercel doesn't even use any oil between changes(3 to 4k)
Are you talking about collapsed, like stuck up inside the slit? If so then yes. Not a one of them were broken or anything. The cylinder walls were just as smooth as a baby's butt. So far I've used a half a tank and it's on 152 miles and that's running the air conditioner. I've got a knocking noise coming from the passengers side sounds like the front tire. It doesn't do it all the time but sounds like something hitting the bottom like your dragging something hanging down, but nothings there. I just wonder if it's not a cv joint. I priced those and they are about 60 bucks a peice.
Are you talking about collapsed, like stuck up inside the slit? If so then yes. Not a one of them were broken or anything. The cylinder walls were just as smooth as a baby's butt. So far I've used a half a tank and it's on 152 miles and that's running the air conditioner. I've got a knocking noise coming from the passengers side sounds like the front tire. It doesn't do it all the time but sounds like something hitting the bottom like your dragging something hanging down, but nothings there. I just wonder if it's not a cv joint. I priced those and they are about 60 bucks a peice.
General_Starr
10-25-2007, 08:45 AM
I have the diagrams but this damn place will not let me post an attachment
If possible, can you send me one for a , '87 model, 3 dr hatchback? I have the one in my hood, but it's faded to the point of unreadablility. Also a Haynes manual, but not diagrammatic - was only illustrational :banghead:
As i could see all my vacuum hoses are all over the freaking place, like some newb just stuck them wherever they saw fit. And there is so many of them, it's like some sort of unsolvable maze.
[email protected] thanks for any help :thumbsup:
If possible, can you send me one for a , '87 model, 3 dr hatchback? I have the one in my hood, but it's faded to the point of unreadablility. Also a Haynes manual, but not diagrammatic - was only illustrational :banghead:
As i could see all my vacuum hoses are all over the freaking place, like some newb just stuck them wherever they saw fit. And there is so many of them, it's like some sort of unsolvable maze.
[email protected] thanks for any help :thumbsup:
gator2764
10-25-2007, 09:03 AM
If possible, can you send me one for a , '87 model, 3 dr hatchback? I have the one in my hood, but it's faded to the point of unreadablility. Also a Haynes manual, but not diagrammatic - was only illustrational :banghead:
As i could see all my vacuum hoses are all over the freaking place, like some newb just stuck them wherever they saw fit. And there is so many of them, it's like some sort of unsolvable maze.
[email protected] thanks for any help :thumbsup:
Is it California or Federal emissions?
As i could see all my vacuum hoses are all over the freaking place, like some newb just stuck them wherever they saw fit. And there is so many of them, it's like some sort of unsolvable maze.
[email protected] thanks for any help :thumbsup:
Is it California or Federal emissions?
Automotive Network, Inc., Copyright ©2026