Car stalls please help

I have a 2003 Mitsubishi Eclipse GT Spyder and my car all of a sudden started to stall. When I step on the gas pedal it goes and then stops and repeats until the car turns off. I have no idea what is happening and the check engine light does not come on. Any ideas???

I got a code reader and the codes are P0102 and P0107 if it helps I have no idea what they mean.

first off welcome to the forums second this is the 90-99 eclipse/talon.laser forum not the 2000+

Why did he make another post here ? you already make a mistake, the first time ( post in wrong forum ), now you make another wrong post again.

google those codes and see what you come up with. you can usually find some useful information as to what those codes mean with google as well as fixes for those codes

google those codes and see what you come up with. you can usually find some useful information as to what those codes mean with google as well as fixes for those codes

I think I seen a list of all the codes on club3g.com too.

Heres the page http://club3g.com/forum/showthread.php?t=37997.
P0102-Mass or Volume Air Flow Circuit low Input
P0107-Manifold Absolute Pressure/Barometric Pressure Circuit Low Input
Hope this helps.

guessing by what Brad said it sounds like an intake problem. Make sure all your vaccume hoses are firmly connected, and your MAS is connected correctly. Make sure your intake manifold is clear of any crap, and you have a clean air filter. Hope you figure it out. I would suggest not clearing those codes until you have figured out the source of the problem.

guessing by what Brad said it sounds like an intake problem. Make sure all your vaccume hoses are firmly connected, and your MAS is connected correctly. Make sure your intake manifold is clear of any crap, and you have a clean air filter. Hope you figure it out. I would suggest not clearing those codes until you have figured out the source of the problem.

sounds like his MAF is disconected or a vacume hose on the intake is.

or clean the MAS you can find MAS cleaner at auto parts stores. i wouldn't suggest using soap and water, actually get the stuff you are supposed to use for that.

another thing. good luck!

first off welcome to the forums second this is the 90-99 eclipse/talon.laser forum not the 2000+

Why did he make another post here ? you already make a mistake, the first time ( post in wrong forum ), now you make another wrong post again.

Welcome to the forum. As shown above you will be dealing with both types of people. Hopefully more friendly ones than the other. Enjoy your stay.