Bumper Question!!

Hey guys, i have asked this question before, but it was for the 88 DX and now since i got the 90 Si and since the 88-89 bumpers are different from the 90-91 bumpers, i guess its different to take them off also..... So, i bet there are screws behind all sorts of things, but what i wanna know, is where they are exactly if anyone can help me! PLEASE! Thanks guys!

6 bolts
2 phillips head in each wheel well -- right on the lip
remove the bumper lights 4 phillips screws
2 bolts behind each bumper light - i think 11mm or 12mm i forget


*take the bulbs out of the socket prior to removal - so they don't get busted*

Is there anything behind the corner lights?

No - behind the bumper lights

I took mine off today 91 Si

Remove the bumper lights - remove 2 11mm bolts behind each light
Remove 2 10mm bolts under the car - the one with no plastic around them
Remove 2 phillips head screws in each wheel well

Pull genty to release the mounts near each fender

If you still have all factory plastic liners make sure the are attached firmly - mine got ripped off by the tire after i took it out for a road test
i heard it rubbing but figured i'd re-attach when i got back, didn't work that way. it got torn off making big noise noise like a tire blowing out. Broke the wiring connection for the right corner turn signal. Well atleast i get more air flow for my cold air, i just hope it dont rain til i get the new liner. then i have to got back the short ram

Okay, great thanks, I hope i dont ruin that thing around my cold air intake also, because it rains a lot out here in NY and i can't risk that and i am debating a body kit because it wont cover the intake like my stock bumper does.

I will order a new fender line for the car tomorrow at work(honda). I don't want to keep driving like that. Next time i go racing i know what's coming off.