Dual exhaust ITR question...

First, anybody like carbon fiber hoods? :D
http://www.imagestation.com/picture/sraid28/pd43a6b85c79a7c3b546e15ca79cf57dd/fd63ed2d.jpg
sorry for the blurry pics too, it's dark in my house :)
anyways, I was wondering if anyone has done dual exhaust on their ITR. I have 3 ITRs and the first one I did isn't very good. :D So I was thinking about taking the exhaust off of it and putting it on my new one to have dual exhaust.
http://www.imagestation.com/picture/sraid28/p173c33594c7b3777a8517c0c6bc4fd44/fd63ed24.jpg
I would take a dremel and hollow out a spot for it from where the straight pipe ends. Have it slit into two there. Then have the piping go along the opposite side as the one already there with the muffler on the end. I would dremel out another hole in the bumper just like the one in there, but on the other side. Yay or nay?

I say go for it... you'll never learn unless you try.

I did a dual exhaust conversion on my car, though I used diff. exhaust tip from the one that came with the kit, I say go for it!!
http://files.automotiveforums.com/uploads/339453integra2.jpg

Hono - On your ITR, are those decals or a custom paint job? It looks good!

http://files.automotiveforums.com/uploads/556859integ1.jpg
Did someone say carbon fiber??
http://files.automotiveforums.com/uploads/608008integ2.jpg

I say go for it.... although you should make it so it is like what a real dual exaust would be like on a 4-cylinder...

And Styxnpicks, thats a sweet lookin rear end on your except for the altezzas (I dont like Altezzas) and thats a cool idea for the front bumper!~Got any more pics??

I'll post beter pics tomorrow sometime, when I actually have some light, Its to dark right now and its throwin the camera off, this is also the firt time a tried hacking into the plastic to make a semi custom bodykit, This will also probably be one of the only models I'm going to build with euro clears, I don't care for them either, I see alot of civics driving around here with the same eruo clears, and it gets annoying, I feel that they lost their novelty, at least for me

Cool..... Styxnpicks, I think it would be awesome if, since you are now missin a set of headlights, you just made the headlights with one light on the outside for each one and shave the other wholes!!!! that would be sweet!... also, how did you go about makin that rear bumper?! it looks awesome@!!

lol, good idea, too bad I already painted it, I still have the other side of the headlights in the box, the extra set came from a revell mustang super stallion,two 1/4 holes later they fit! The back bumper was done with the drill and x-acto knife, I also shaved the dorr handles, and emblems

i think it would look rice, i mean nice,

I can't find the dashboard! looks like this projects not going anywhere fast

*edit I found it in my CLK-GTR box, now how did it get in there?

Hey Styxnpicks, ur integra's rear is sick. How did u do it. Its soo hot. i'ds like to knoiw becuz im building a ITR right now. i have painted it also but I would mind doing what u did the next time i build it.

Originally posted by TheSyndicate
Hono - On your ITR, are those decals or a custom paint job? It looks good!
It's decals from a Revell 2n'1 Challanger. Check out the Hawai'i licence plates!!!!

Styxnpicks, u can order parts from www.revell-monogram.com for free, except for shipping!!!!

well I found my dash in the wrong box, and I also have some beter picshttp://files.automotiveforums.com/uploads/733841integ3.jpg http://files.automotiveforums.com/uploads/559611integ4.jpg

Hey Hono, is that a custom gt wing you built for your integra or did you buy it? it looks pretty sweet!

Also, Hono... how did you make those side skirts on your integra? I want to put some on mine cuz it doesnt look right without them.. and also, did you lower it or is it like that out of the box?

Ok, Hash_man, the side skirts were made from the "trees," just look for a "tree" you don't have to sand much and cut it to the correct length, this is what I did before I started using putty.

apex_N1, well it has been modified, the parts mainly came from a Tamiya NSX, any of the racing versions, it comes with two wings they tell u to discard one of um', the only thing u have to do is cut it to the correct height.

And for everyone else, if u guys want to make custom state licence plates like my hawaii one:) go to: http://www.acme.com/licensemaker/licensemaker.cgi?text=&state=Hawaii&r=714739761

Hope this helps u guys out!! :):):)

Oh, one more thing, Hash_man no the car wasen't dropped, that's how it comes.

Originally posted by Honoturtle
My turn for a question, what's up with the "Malcolm :wave:" in your sig? :confused:

not sure. Y u gry prob?!?!?!?!?! j/k here i'll remove it for yah

Originally posted by Honoturtle
not sure. Y u gry prob?!?!?!?!?! j/k here i'll remove it for yah naa, it's cool, you don't have to take it off. It's just part of my name, so I was curious. :)

I did a dual exhaust on mine, came out looking real good (used another of the integras exaust, cut it, flipped it around, sanded the heat shield down and made it symetrical on the bottom. I also did a custom nitrous setup, with the bottle in the middle of the back seat, tried to do a direct port setup on the intake manifold but it came out pretty crappy. between me and my friend we had like 5-6 of these integras, then twice we ordered about 3-4 spare parts from revell

Originally posted by eclipseGSX
I did a dual exhaust on mine, came out looking real good (used another of the integras exaust, cut it, flipped it around, sanded the heat shield down and made it symetrical on the bottom. I also did a custom nitrous setup, with the bottle in the middle of the back seat, tried to do a direct port setup on the intake manifold but it came out pretty crappy. between me and my friend we had like 5-6 of these integras, then twice we ordered about 3-4 spare parts from revell I'm on my 3rd one, and I have one more in my closet waiting for me, and my cousin has done two. What did you use for the bottle of nitrous?

edit-and have any pics?

I also did a custom nitrous setup, with the bottle in the middle of the back seat


Man I put there!!! At least I'm not the only one who's done it

I did a Nitrous setup too! I used wires as the "pipes" then used some spare parts from a hydrolics car, not sure what the part is called, but it looks like a bottle. By the way, I have 3 integras, but my first one is being stripped for a new look, and a turbo system.

got the bottles from detail master, it includes 2 bottles and a photo etch tree with the valve and brackets and what not. I'll work on getting a couple pics up of one of my friends...i dont have any of mine right now.

well I decided to put two amps and a capacitor on the rear deck lid for the imaginary subs in the trunk after I found out that The nos setup had been done before, I'll get pics up after im finished

take a playmobile fire inxtinctor paint it blue put a nos sign on it and you are done.:D

maro:D