Getting a GSR block ...now what do i have to do?

Ok i want a gsr bare block and i'm gonna put aftermarket pistons, rods blah blah . Can i put my b16 head on it with no special modification?

Get the cylinders honed, take your head to a machine shop, choose what components you are going to use and start pricing/purchasing them. And be prepared to spend more than you thought you would have to.

Originally posted by Bleebdat
Get the cylinders honed, take your head to a machine shop, choose what components you are going to use and start pricing/purchasing them. And be prepared to spend more than you thought you would have to.

Ok if you're talkin about taking my head to the machine shop are u talking about port and polish? Or are you talkin about takin it to the machine shop just to make it fit on the gsr block? :confused: I'm ordering the whole skunk 2 valvetrain with stage 2 cams, which is like 1600 so thats settle. I'll worry about the bottom end later. I'm just tryin to see if it'll fit on my b16 head with out any modifications.

I think it will fit perfectly...I'm not sure though...I will reconfirm and let you know...but damn...that will be a hellofa set up...keep us posted.:D

Originally posted by EF_LSVtec
but damn...that will be a hellofa set up...keep us posted.:D

Yeh i know. Man this guy is getting rid of it for 150!! Yeh i'll let u know whats sup with it. And yeh please let me know if it'll fit perfect. Thanks!

This is what I found out...B16 head will fit but you will lose compression. Head flows better than a GSR but need to get head shaved to compensate. Build your block too with good pistons, like JDM CTR...:)