horn location
mycobra70la
07-28-2006, 10:08 PM
94 mustang- is it inside drivers front fender and where to access
reekor
07-29-2006, 01:11 AM
Horn Mounting Location
Both horn assemblies are mounted in the LH wheel well on a common bracket.
Horn Assembly
Removal and Installation
Disconnect the horn wire from the terminal and remove the retaining screw. When installing a horn assembly, tighten the retaining screw to 8-12 N-m (6-8 lb-ft).
94 mustang- is it inside drivers front fender and where to access
Both horn assemblies are mounted in the LH wheel well on a common bracket.
Horn Assembly
Removal and Installation
Disconnect the horn wire from the terminal and remove the retaining screw. When installing a horn assembly, tighten the retaining screw to 8-12 N-m (6-8 lb-ft).
94 mustang- is it inside drivers front fender and where to access
mycobra70la
07-29-2006, 01:53 AM
Okay everything is connected. What is the next most likely thing that could cause the horn not to blow.
reekor
07-29-2006, 11:00 AM
Possible Source(s):
§ Circuitry open/shorted.
§ Horn relay.
§ Horn blow switch.
§ Horns.
Okay everything is connected. What is the next most likely thing that could cause the horn not to blow.
§ Circuitry open/shorted.
§ Horn relay.
§ Horn blow switch.
§ Horns.
Okay everything is connected. What is the next most likely thing that could cause the horn not to blow.
Automotive Network, Inc., Copyright ©2026