B20 swap questions

ok. I've decided to swap in the b20b into my 97 coupe. i should be able to afford the motor with my income tax next year. I want to, between now and then get all of the odds and ends. The ultimate goal of this swap is to have a b20b turbo setup. so keep this in mind. first off, what all is needed for this swap. which ecu, axles, etc......i want to know everything (anyone know of a site detailing this swap)

as for the transmission i havn't decided whether i want to start with the GSR and swap to the ls tranny when i turbo or just go with the ls from the get go.

any and all information would be greatly appreciated

dude. this swap is prety streight forward. there are a few things that you may need to remember though. first off you will need to set up a vtec by-pass relay. second of all you will need to convert your speedometer cable for your transmission to an LS plug from the harness. you will also need to upgrade the fuse under your dash board to a 10 or 15 amp fuse for the ignition/alternator/speed sensor because you will pop the fuse. you will need to use your stock harness. you will be able to use ls drive shafts and you will also need to by the nock sensor will need to be converted and there is no crank sensor on a dohc motor when there is one on a single cam motor. if you have any other questions e-mail me at [email protected]