gauge pod

hey guys, my boost gauge isn't staying in the pod, it keeps slipping out. You have any ideas to keep it staying in there?

hey guys, my boost gauge isn't staying in the pod, it keeps slipping out. You have any ideas to keep it staying in there?

Your boost gauge should come with black rubber band ( the wide side, not thin rubber band ), or just go to wallmart and get one.

dab of glue ?

Your boost gauge should come with black rubber band ( the wide side, not thin rubber band ), or just go to wallmart and get one.

so its just a really wide rubber band?

yes, mine came with a black ruber band, i put it in there and it did help, but i have problems keeping gauge pod on the frame.

Huh, the Autometer Cobalt one I have had a lip over the front and a big threaded ring that screwed onto the guage itself and held it in place. I would just use some of the hardcore double sided tape or some rubber cement.

i ended up just using masking tape, and that seemed to make it stay in there. I didn't wanna spend too much time out there with it cause its 100 DEGREES outside 2day. Us Wisconsin peeps arn't used to this shit:)