'98 rear speaker removal help

i know you have to remove trim and stuff to get to the speakers but how do you do it? does anyone have a guide? i have already seen the ones you have to buy but my mom won't let me buy them, so is there any one who can help me out?

it would be greatly appreciated

and if this info is needed, i have a '98 Z-24

1) Lower the back seat, and remove the 4 clips that hold the plastic trim pieces to the rear dash.
2) Next, remove the 2 plastic trim pieces. To do this, pull them slightly toward you, and angle them toward the ground. The small clips that hold them in will pop out of place.
3) Pull the rear seat belts through the slots in the back deck, and then pull the slots inward a bit. This will allow the piece of rear deck that is under the sides to come free.
4) Now just start pulling, and jiggling it a bit. You may also need to bend the centre of the dash up slightly, being careful not to crease it. It will eventually slide out.
5)If you are trying to remove the rear speakers, simply push in the little clips that are facing you. You will need to disconnect the speaker wire connection. The factory speakers are held in by 4 screws. Remove those and the factory speakers will pop right out.
6) The Rear Speakers Are 6X9's, but you can either make or buy adapters so you can use a component speaker system.
7) Reinstall in reverse.

http://www.autozone.com/images/cds/jpg/small/0900823d80192208.jpg (javascript:pop()
Fig. 6: Removing the rear window panel trim

http://www.autozone.com/images/cds/jpg/small/0900823d80192209.jpg (javascript:pop()
Fig. 7: After removing the rear speaker and spacer assembly, ...


http://www.autozone.com/images/cds/jpg/small/0900823d8019220a.jpg (javascript:pop()
Fig. 8: ... separate the speaker from the spacer by unfastening the retaining bolts

when i try to get that piece off it gets hung up on the trim around the right and left rear windows, how do you get the trim off the side windows to get to that panel on top of the speakers

wow when did chevy get its head caught in its ass?

mine are in a steel supportive brace, held up by 2 metal hangers.

you can reach them by sticking your head in the trunk.

and do y'alls 3rd gens have round speakers? mine seats 6x9s

mine had 6x9's when i went to replace them, im pretty sure they were stock....

they are still 6x9 but they are screwed in from the top so you cant remove them from the trunk even though you can see them clear as day from the trunk there is no way to get them out, so it sux