Keyless remote programming?
CTM
08-09-2002, 04:44 PM
Does anyone know how to program a new remote for my 2002 Burb? It is apparently rocket science as I can find out how to program any other make & model except for GM cars. Help!
tayloel
01-21-2005, 04:08 PM
To program your remotes do the following with the doors closed and the truck off:
1. Turn the ignition on and off three times (without starting the truck).
2. Press the unlock button on the drivers side door. You should here the locks cycle. If not repeat step one and try the lock button.
3. Press the lock button on the remote. You can program up to four remotes at once.
Hope this helps,
Eric
1. Turn the ignition on and off three times (without starting the truck).
2. Press the unlock button on the drivers side door. You should here the locks cycle. If not repeat step one and try the lock button.
3. Press the lock button on the remote. You can program up to four remotes at once.
Hope this helps,
Eric
rabt
01-21-2005, 06:05 PM
umm this thread was 3 years old.............
Automotive Network, Inc., Copyright ©2026