I've got a problem

OK I'm fiberglassing kickpanels for my '96 Civic thus I have to move my ECU somewhere else, what I did was lengthen the wires because I thought I could move it in the glovebox... didn't work, so I uncrimped them and soldered them to the original and now the CD player doesn't work :banghead: ... everything else seems to be working fine. Is there a pin for the CD-on in the ECU or do you think I might've blown a fuse from doing this project? any help would be greatly appreciated.

Uhhh... You're typically not supposed to touch any wires THAT close to the ECU. E-Mail Boomslang (www.boomslang.us) and ask them to fabricate an extension harness... They probably won't charge you anymore than $80, and it won't mess anything up.

Fix the wiring if possible, I wouldn't be surprised if there are other problems waiting to be found too. So just get it back to how it was, and hope no damage was done.

-Wes

Well I don't need to elongate the wires anymore... I just need to fix this problem... I just need an ECU pinout diagram so I can locate the source of the CD-on pin, if possible.