tranny trouble
domf
06-30-2006, 10:44 PM
I have a 94 K1500 with a automatic tranny, my reverse is almost gone, its slipping real bad. I have located a transmission out of a 94 Blazer with a V6 in it. Does anyone know if this will fit in my truck? It looks like the same tranny 4L60-E, and the mounts look the same, but is it a different (weaker) tranny?
Thanks,
Dom
Thanks,
Dom
domf
07-01-2006, 07:43 PM
anybody?
Dom
Dom
randy78
07-01-2006, 08:11 PM
howdy there
which v-6 ?
and what engine is in your rig ?
anything 4.3L and up will be 90 degree same housing pattern
the 94 is 4x4 right ? if not then forget it
we need more info
remember a v-6 tranny is gonna have less/weaker parts in it than a v-8 one
thats how they did it
some believe and some wont
and if they have anywhere near 130k on them then its time for rebuild, ask any trans shop, this is a common issue
dont get the tranny unless its at least quite a bit less than 100k on it
good luck
which v-6 ?
and what engine is in your rig ?
anything 4.3L and up will be 90 degree same housing pattern
the 94 is 4x4 right ? if not then forget it
we need more info
remember a v-6 tranny is gonna have less/weaker parts in it than a v-8 one
thats how they did it
some believe and some wont
and if they have anywhere near 130k on them then its time for rebuild, ask any trans shop, this is a common issue
dont get the tranny unless its at least quite a bit less than 100k on it
good luck
troy1
07-05-2006, 02:17 PM
the tranny out of the blazer won't work the bell where the dust cover bolts to is different.
Automotive Network, Inc., Copyright ©2025
