short shifter good or no good

http://cgi.ebay.com/ebaymotors/95-99-MITSUBISHI-ECLIPSE-TALON-SHORT-SHIFTER-96-97-98_W0QQitemZ150002706502QQihZ005QQcategoryZ33736QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem



if u guys say go for it im buying it please tell me asap

I have one just like it that I got from ebay and I love it. I say go for it .Mine seems to be holding up verry good and i like the close ratio that it gives me. But thats just my :2cents: .

Its the same style as my B&M... It made a huge difference and I recommend it. But remember, its no B&M... It could last just as long or it could break in a week. All depends on the quality of the metal.

I have an ebay one also, and I love it. Install was a breeze except that the bearing thing that makes the short shift possible was a little too long and needed to be ground down a little. Also, get the base bushings along with it, and you will be in heaven lol.

i already have all bushings in car and under hood and btw i orderd the short shifter should be here any day ill post when i get it installed

Base bushings? Please elaborate!

Do you mean solid mounts? I just took the bushings out and torqued my shifter down, but Id love to get a shortshifter and do it right.

Base bushings? Please elaborate!

Do you mean solid mounts? I just took the bushings out and torqued my shifter down, but Id love to get a shortshifter and do it right.

Talking about shifter bushings, basically metal ones to replace the rubber ones. Get those Instead of torquing down the shifter...

my underhood ones are metal but my incar ones for the shifter plate are urathane