How to program keyless remote?
hitch396
06-29-2006, 01:29 PM
Can someone tell me how to program a keyless entry remote for a 03 sonoma? Don't want to pay a dealership to do it and can't find anything on the net to tell me how. Thanks :banghead:
Stiletto
07-03-2006, 01:23 AM
hi not exactly sure i have a 97 super sport camaro with a problem there too, the panic alarm still works but i can't set or shutoff door locks /alarm
i think my owners manual said something about re sink buyt it didn;t seem to work Stletto who still wants a 89 -93 sonoma or s 10 and nobody ever replies so i might buy her a 94 i saw for sale
i think my owners manual said something about re sink buyt it didn;t seem to work Stletto who still wants a 89 -93 sonoma or s 10 and nobody ever replies so i might buy her a 94 i saw for sale
Speedlimit2k
08-25-2006, 11:04 AM
While holding the driver's side door "unlock", turn ignition on then off 3 times.
The locks on your truck should cycle (lock and unlock)
After they cycle, hold the lock and unlock buttons at the same time on the first key fob, hold for 20 seconds , or until the locks cycle again. Then hold the lock and unlock on the next key fob and so on.
After you have programmed the all the key fobs (up to 4) then turn the key to on for 10 seconds, off 10 seconds and give the fobs a try.
Hope This Helps
The locks on your truck should cycle (lock and unlock)
After they cycle, hold the lock and unlock buttons at the same time on the first key fob, hold for 20 seconds , or until the locks cycle again. Then hold the lock and unlock on the next key fob and so on.
After you have programmed the all the key fobs (up to 4) then turn the key to on for 10 seconds, off 10 seconds and give the fobs a try.
Hope This Helps
Automotive Network, Inc., Copyright ©2025