How to disconnect ABS system??

My ABS has been going off whenever the brakes are pressed more than once when stopping. Can someone direct me on how to disconnect the ABS unit??


Also:

My gas gauge is not reading properly. what do i need to do to fix it??



thanks in advance!!!!!

First of all this was asked a while ago, and I'll give the same answer - BAD IDEA, its there for a reason, get it fixed. Second if its a '95 and up, you cannot disconnect the system, as its controlled by the PCM, which controls everything else on the truck, you can't disconnect it.

I agree, bad idea, get what is causing the problem fixed and you will have a much safer truck. he has a 98 so it is controlled by the PCM. You have a bad sending unit which has caused your gas gauge to most likely malfunction which needs to be replaced and it sits on top of the fuel pump inside the gas tank I believe. Good luck

I got drilled for that last time so im not sure if I wanna tell you how to unplug the ABS if you have a first gen blazer......

Bad sending unit most likely thats the problem with my blazer as well


edit: nm just saw that it was a second gen blazer