How to make diecast car speakers

Hello I am new here and I need help . I am working on a clk500 and i wanted to make a box for the trunk, but I don't have any speakers to go with them. Any hints will help. Thanx

what i would do is take some foam core andmake the box. then take some jada speakers and glue them to the foam core box. you can either put fabric over the foam core or paint it to your desire. i hope you understand me. and btw are you customizing a kyosho clk? bcz i thot kyosho only makes the clk in 240 and 320 form aka clk240 and clk320.

Thanx for the help I will post pics if i can tomorrow, and no its by maisto.

maisto never made a clk. maisto makes the slk?
motormax and anson made the preivious generation clk
kyosho makes the current clk

maby it is Kyosho. I thought is was maisto because most of my cars are by maisto

it should say on the bottom.

ya thanks i needed that too!

no problem. thats why we are here.

ok I researched a little and thought would you be able to make the box from epoxy putty. if anyone has tried this please tell if it works or not.

another thing how much does epoxy cost. also what can you use for neon, and how much does it cost

what i used for neons was just LEDs fit into a small drilled hole.. with the batteries held together in a hidden spot (back seat or trunk) 2, 3, or 4 each side. ive done trunks, underneath, backseats, engines, and mirrors.

what i used for neons was just LEDs fit into a small drilled hole.. with the batteries held together in a hidden spot (back seat or trunk) 2, 3, or 4 each side. ive done trunks, underneath, backseats, engines, and mirrors. Thanx that helped alot will try!!!:grinyes: