Pilot tube ? for David

Dude,

Did someone say it would not work for your engine? If so, why? I do not see why it would not work.:uhoh:

It would work if I needed the extra fuel with smaller more street friendly jets. But Kevin sent me 67/82 jets in my CSU carb. It is meant more for turbo motors, but could work on a blower motor. It has not been tested yet with a blower motor that I know of. All it does is give the bowls a better pressure signal to push more fuel thrue less jet. So in theory it would work with a blower motor as well. I dont think I will need them though.

67/82, that is not that bad at all. At least its good to know if we run into a rich cruising mix, you could always try to jet down a little with that mod. With yours running 67, like you said you should be OK.

You wouldn't happen to have any 2" exhaust pipe around? I need a 4" piece for my wastegate.

Let me check & I'll get back to you. I cant remember if it was 1-3/4" or 2" that I used for my Mondo bypass valve.

Sorry Tony, no 2" pipe.

Sorry Tony, no 2" pipe.

Thanks for looking :)