changing clutch 92 barina

could someone explain steps for changing clutch please.

well, first you have to raise the car and remove the gearbox, then you have to remove the clutch as it should tell you in the clutch kit, then install the new clutch and refit the gearbox to the car, reconnect all linkages and reverse light switch and then road test, make adjustments as needed and all should go well. btw u will have to drain the gearbox of all fluid before you remove it from the car, there should be a drain plug, undo it below a suitable container. once it has drained, reinstall it. just remember to refill the gearbox with the right fluid before road testing.

machine the flywheel before fitting the new clutch.
replace the rear main oil seal, while you have the gearbox out.