2nd gen TT owner help

Hey guys, so I'm finally motivating myself to get back to work on my car. It's been awhile, I've built up a bit of a bankroll for some new parts, and I wanna get this bitch running again. I've been doing a ton of reading, and everything I've been troubleshooting seems to conflict with something else. It's like, one test will say A, and then test #2 will say not-A. Being a fairly logic oriented kinda guy, this drive me nuts. Anyway, I need a quick favor from a 2nd gen TT owner with a volt-meter (or whatever they are called).

http://www.stealth316.com/images/kv-stockpcv.jpg

In above picture where the word 'intake' is, there is a 3plug harness. Can you please unplug the middle of the 3 plugs. It should have 6 wires running into it, 3 wide x 2 high. Can you measure the voltage and resistance at each of those wires (from the disconnected plug, not the one still attached to the plenum)


For the sake of getting the number straight, let's number them from left to right, top to bottom, so 1-3 across the top, 4-6 across the bottom.

This should only take 5 minutes and would be a huge help.
Thanks, Geoff

i can't see the pic

Can't see the pic or else I would help you out.

http://img114.imageshack.us/img114/7574/kvstockpcv7wp.jpg
Hopfully that one will this image is curotisy of Stealth 316 Orginal pic can be found here http://www.stealth316.com/images/kv-stockpcv.jpg

Thanks for catching that Spawn.

I'm on my quest to become more helpful so no problem.

I'll see if I can dig out my voltmeter tonight and get some numbers.

dammit dream spawn beat me to it as I too am on a mission to be more helpfull