Remote mount turbo setup please help

i have a buick gn turbo im going to use as the remout mount turbo. i have a boost controller and a blow off valve. i need to know where the air filter is going to go and where the 2nd oil line is i only see one fitting. i can post pictures if needed.

thanks
jason

Wrong forum?

Anywho, this should help...

http://tinyurl.com/sx62a

It seems really straight forward though, just pop the filter on to the mouth of the intake. Just in case you're trying to DIY this, I suggest you probably should go here, www.ststurbo.com it should help alot if you don't already know about it.

remote mounts are easier than conventional IMO. Give it a try. And what are you doing it to, you sort of forgot that.

A buick grand national. I think remote turbo systems (turbo by cat right?) is gay as fuck. Thats a lot more fucking around than the IC and intake pipes should have to do. Plus the exhaust has that much more time to cool by then, thus causing denser air at the turbo and less volume passing though it so slower spool time.

http://www.prowleronline.com/ubb/image_uploads/turbokit2.jpg like in that picture my turbo does not have a round piece there to put a cone filter on. it has a piece with 6 bolt holes so i really do not know what to do there. http://cgi.ebay.com/ebaymotors/Garrett-Airesearch-A-R-48-63-Regal-Turbo_W0QQcmdZViewItemQQcategoryZ33742QQihZ019QQit emZ8071187780QQrdZ1QQsspagenameZWDVW

looks like that turbo

He said hes using a GN turbo not the car. Hence why I asked what car hes doing this to.