valve replacement

Hey, I need some help. I've never had to replace my valves before, but I bought some stock replacements and don't know where the hell to start at. If anyone has pictures of the process that would be greatly appreciated, because I can't find any.:banghead:

http://www.engnbldr.com/4g63s_web.jpg

You mean valve cover gasket ?? it really easy job, take out all the plug wire, unbolt all the bolt, take out the valve cover, remove all the old gasket, from the valve and engine, put some rvt silicont ( spell ) around the engine , and place the gasket over it, then the valve cover, retight all the bolt with right torge. put all the spark plug wire. turn on the engine and check for leak, you should feel more power after you replace the valve cover gasket. by the way change all the spark plug gasket ( those 4 ring thing, it should come with the gasket kit ). you done.

NOOOO he means valves there Killer, look at the pic he has.

haha way to go killer...

are you asking on a" HOW TO" to relace valves? I know you can make a specal spring compressor off Dsmtuner tech articals. I've never botherd paying much attention becasue I havn't had my head fail... yet....<knock on wood>

LOL first time I read, the pix wasnt their. now it is :uhoh: .

LOL first time I read, the pix wasnt their. now it is :uhoh: .

Killer, you don't have to lie to make friends alright. :nono:

I swear I dint saw those pix first time I was reading it. I know what valve is, and valve cover is, if those pix is appear in the first place, I just leave this topic alone, but it dint saw it , they why I ask him about valve cover.

by the way, you can edit your message any time you want too. :wink:

Why do you're valves need to be replaced? Depending on the situation i may change the install. If you bent the valves badly you may need some new guides. If you bought oversived valves the seats need to be cut or new seats may be needed. You are probably better off taking it to a machinr shop and having them install the valves.

I was just messing with ya Killer.

I was just messing with ya Killer.

LOL