programing keyless entry

hi new to the site and i searched the forum on how to program the keyless entry. i found instructions but when i get to step 4 the locks cycle the horn honks and a few seconds later it will cycle again and honk. does this mean i do not have the receiving module or do we? cause when we purchased the vehilce the dealer gave us the key fobs. from what i understand from reading in the fourms is that the TB comes with the moudule you just need to program it? can some one please help. thanks!

1 SIT IN VEHICLE AND CLOSE DOOR

2 HOLD FINGER DOWN ON UNLOCK POWER DOOR LOCK SWITCH ON DRIVERS DOOR (http://www.automotivehelper.com/topic107755.htm#).

3 put key in ignition, TURN IGNITION ON / OFF , ON / OFF.LEAVE KEY IN IGNITION.(DO NOT START VEHICLE, ON POSITION IS THE POSITION BEFORE START)

4 RELEASE FINGER FROM POWER DOOR LOCK.POWER DOOR LOCKS (http://www.automotivehelper.com/topic107755.htm#) WILL CYCLE.(JUMP UP AND DOWN)

5 PRESS AND HOLD BOTH THE LOCK AND UNLOCK BUTTONS ON NEW REMOTE UNTILL YOU HEAR POWER DOOR LOCKS CYCLE.(JUMP UP AND DOWN) YOU MAY HAVE TO HOLD BOTH BUTTONS DOWN FOR 5- 20 SECONDS.

6 TAKE 2ND NEW , OR OLD REMOTE AND HOLD BOTH UNLOCK AND LOCK BUTTONS DOWN UNTILL LOCKS CYCLE.(MAY TAKE 5- 20 SECONDS)


7 TURN KEY ON, THEN OFF.
YOU ARE DONE, EXIT VEHICLE AND TRY YOUR REMOTE.

hi new to the site and i searched the forum on how to program the keyless entry. i found instructions but when i get to step 4 the locks cycle the horn honks and a few seconds later it will cycle again and honk. does this mean i do not have the receiving module or do we? cause when we purchased the vehilce the dealer gave us the key fobs. from what i understand from reading in the fourms is that the TB comes with the moudule you just need to program it? can some one please help. thanks!

1 SIT IN VEHICLE AND CLOSE DOOR

2 HOLD FINGER DOWN ON UNLOCK POWER DOOR LOCK SWITCH ON DRIVERS DOOR (http://www.automotivehelper.com/topic107755.htm#).

3 put key in ignition, TURN IGNITION ON / OFF , ON / OFF.LEAVE KEY IN IGNITION.(DO NOT START VEHICLE, ON POSITION IS THE POSITION BEFORE START)

4 RELEASE FINGER FROM POWER DOOR LOCK.POWER DOOR LOCKS (http://www.automotivehelper.com/topic107755.htm#) WILL CYCLE.(JUMP UP AND DOWN)

5 PRESS AND HOLD BOTH THE LOCK AND UNLOCK BUTTONS ON NEW REMOTE UNTILL YOU HEAR POWER DOOR LOCKS CYCLE.(JUMP UP AND DOWN) YOU MAY HAVE TO HOLD BOTH BUTTONS DOWN FOR 5- 20 SECONDS.

6 TAKE 2ND NEW , OR OLD REMOTE AND HOLD BOTH UNLOCK AND LOCK BUTTONS DOWN UNTILL LOCKS CYCLE.(MAY TAKE 5- 20 SECONDS)


7 TURN KEY ON, THEN OFF.
YOU ARE DONE, EXIT VEHICLE AND TRY YOUR REMOTE.


Thanks Dawg, the instructions worked like a charm!!!!
:grinyes::grinyes::grinyes::grinyes::grinyes:


chinozzz
http://www.XBadvance.com

If the procedure didn't take, either the batteries are shot in the FOB's or the dealer gave you the wrong FOB's.
For TB's your FOB's should read:

GM 15008009
FCC ID: MYT3X6898B
CANADA: 28071032143

Joel

If the procedure didn't take, either the batteries are shot in the FOB's or the dealer gave you the wrong FOB's.

Joel

I said the instructions were "SICK" aka Great, and it worked like a "charm" aka perfect...:screwy: :screwy: :grinyes: :grinyes:

I got two fobs off of eBay for $30 shipped and got the same directions off of trailvoy.com and they worked like a charm.

Yep, I lucked out and got a pair of used ones off eBay for $20. IIRC, I used the trailvoy.com instructions as well.

Joel

I have a 95 blazer and the keyless remote has died in the washing machine.

If I purchase a new one online.
Do I really need a working remote to program the new remote.

..Do I really need a working remote to program the new remote.

As far as I know, no. I've done 5-6 GM FOB programmings, and they all make you reprogram all FOBS.

Joel